Print Page - Methven Shower Mixer

Plumbers NZ is New Zealand's largest online plumbing, gas and drainage resource. Plumbing exam help, plumbing news, directory and free quotes.

Title: Methven Shower Mixer
Post by: Goodevans on February 05, 2011, 07:57:56 PM

I am replacing my shower mixer for an unequal system and it is saying if the cold pressure is above 400kPa don't modify it, use the red nozzle (factory fitted) but below 400kPa replace the nozzle with the blue nozzle. I'm in Avondale, Christchurch so what pressure do we operate on here - thanks

Title: Re: Methven Shower Mixer
Post by: robbo on February 05, 2011, 11:38:10 PM

hi, your plumber will know what to do leave it to him,cheers

Title: Re: Methven Shower Mixer
Post by: newguy on February 07, 2011, 07:50:37 AM

Hi, pressure is not necessarily area related. In most cases pressure will be under 400KPA but to be 100% sure I would advise getting the pressure tested. Olso to be aware of is the fact that if your pressure test results with 300 - 400 kpa make sure you get a limiting valve installed as pressure will change at night time. :) hope this helps

Title: Re: Methven Shower Mixer
Post by: Goodevans on February 07, 2011, 08:52:49 PM

Thanks. That is very helpful

Plumbers NZ | Plumbing, Gasfitting and Drainage Community

General Plumbing and Gasfitting Talk => Ask Plumbers (Public) => Plumbing => Q & A - Baths and Showers => Topic started by: Goodevans on February 05, 2011, 07:57:56 PM