Plumbers NZ is New Zealand's largest online plumbing, gas and drainage resource. Plumbing exam help, plumbing news, directory and free quotes.

Proprietary Pipe Systems and Manufacturer's Labels

« fact or fiction? | Use soldering copper pipe fittings for gas »

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1 2
User actions

Jaxcat

May 02, 2014, 01:48:08 PM
Following on from an earlier thread - this was indeed in the Info Brief from the PGDB in April.  To summarise (direct from the Info Brief):

Proprietary pipe systems are one are that have significant changes with the installation of a pipe system.  Key points to note:
The requirement to follow manufacturer's instructions
The requirement to provide a label at the point of supply and
the provision for a reversion fitting or a transition connection

Manufacturers carry out tests to ensure products meet the stands to be used in NZ.  Each manufacturer can have different installation requirements - UV protection is a good example.  Here, instructions must be followed as the manufacturer states.  (NB - following manufacturer's instructions does not relieve the obligation to meet the requirements of Section 2 of the Standard).

As some proprietary pipe systems look alike, it is difficult to tell the difference between systems - particularly after the installation has been there for some time.  Unless state otherwise, no other systems fittings or tooling can be used on their system.  Identifying the system is a key inclusion in the standard.

AS/NZS5601.1 point 4.5.4 states a manufacturer label shall be attached adjacent to the gas meter or LP gas cylinder(s).

Transition connections to proprietary systems or reversion fittings allow for the connection of different pipe systems.  If different piping systems are being used it is important to identify clearly which system is installed in what part of the installation.

For installations in a caravan, AS/NZS5601.2  2.6.2 states:  Proprietary systems shall be suitable for their intended use and shall be installed as a complete entity in accordance with the manufacturer's relevant instructions.  Multi layer proprietary  piping systems shall not be used in mobile applications.

It is important with any gasfitting work you carry out that you are familiar with the means of compliance you are using.  You need to ensure the installation is safe and the work you carry out is compliant before turning on the gas supply and issuing a compliance certificate.

You can view a video presentation on AS/NZS 5601 gas installations at www.standards.co.nz

End of item.

So - after investigation into costs of these metal labels - IPLEX K1 tags are retailing at $25 + GST EACH at Mico.  Your cost will depend on your discount structure, but it also seems to me that these tags are doing a bit of advertising for IPLEX and K1 and should cost significantly less, or come free when you buy the pipe or fittings.

For those of you that haven't seen one of these tags (and you could make your own labels, but they would need to be waterproof) - what they have to have on them is:

Parts of this installation contact the XXXXXXXXXXXXXXXXXX system.

Installed by:  _________________________________
Licence No:___________________________________
Date:  _______________________________________
Capped Tee location: ___________________________


The IPLEX one says:
This home is plumbed with iPlex K1Gas pipe and fittings system for gas.
A threaded connectgor for future extension is located: _________________________________________
Gasfitters name: _______________________________________________________________________
Gas licence number: ____________________________________________________________________
Contact iPlex on 0800 800 262
Website:  www.iplex.co.nz


This will add $25 per job on to the consumer, or make you own and make it cheaper.  A good idea, but any manufacturer of gas pipe and fittings that decides to make the labels available free of charge will get a lot of business.

How many of you are doing this now?

Linkback: https://forum.plumbers.nz/gas-station/11/proprietary-pipe-systems-and-manufacturers-labels/1676/
    Share Post |
Have you learned lessons only of those who admired you, and were tender with you, and stood aside for you?  Have you not learned great lessons from those who braced themselves against you, and disputed the passage with you?  (Walt Whitman 1819-1891)  American Poet

bowtieboy

#1
May 02, 2014, 04:31:14 PM
not Me! ???
    Share Post |
I believe in doing a job once and right. !

bowtieboy

#2
May 05, 2014, 07:39:13 AM
jaxcat, have you seen any of the copper tube manufactures produce these tags ?
    Share Post |

Jaxcat

#3
May 05, 2014, 11:01:45 AM
No, but excellent point - I will follow up.
    Share Post |

Jaxcat

#4
May 05, 2014, 01:58:52 PM
Copper won't come under "proprietary"  pipe systems - relates basically to pex.  Although it is an interesting point.  Our supplier is taking the issue up with the pipe manufacturer that we purchase off basically saying they should come with the pipe - it is necessary now - otherwise we'll be making our own - we won't be paying $12 odd for them.
    Share Post |

bowtieboy

#5
May 05, 2014, 05:45:36 PM
i have today chased up my pexal rep and he will get on to it, i will do the same with our copper supplier and see what comes of it
    Share Post |

bowtieboy

#6
May 05, 2014, 06:01:11 PM
Here is a curve ball for you! why isnt ALL plumbing pipe systems not having to be identified???
    Share Post |

Jaxcat

#7
May 05, 2014, 08:11:26 PM
Possibly because copper is copper and is easily identified, but there are SO many pex systems out their - and say, for example you purchase off one supplier you may not be able to readily identify what the other sorts are - and I guess they want to ensure there is no mixing and matching unless it is approved by the manufacturer's as being able to be joined on to another brand.  Bottom line is this is all at a cost to the consumer and they don't even know it.
    Share Post |

craftsman

#8
May 06, 2014, 09:23:27 PM
why risk or put yourself though it , i only use copper ever on gas
    Share Post |

wombles

#9
May 07, 2014, 09:41:52 AM
My local Big Name supplier didn't even know that there were labels available and thus they don't sell them.   Surely this type of information would be far better than a BBQ with a free T shirt and 5 points. I do find it hard to believe that the Board is so blind with upskilling
    Share Post |

Jaxcat

#10
May 07, 2014, 03:08:26 PM
I only know IPLEX have produced them for K1 - not sure about other multi layered pipe systems - but the PGDB newsletters shows what is required if you make your own labels.  I agree this would be a better upskilling item.  Still you can claim the time it's taken to read this forum and the PGDB article as self directed learning - got to be worth at least 2 points don't you think.  If your big name supplier is Mico then they are selling the Iplex labels - although it would appear not all branches know about it.
As far as Plumbing World goes I wouldn't have a clue.
    Share Post |

bowtieboy

#11
May 08, 2014, 07:58:08 AM
PW had no info on this at our branch....but do now :D, so i guess that the importers of all pex systems havent read nzs5601 yet then aye?
    Share Post |

Jaxcat

#12
May 08, 2014, 04:51:47 PM
From some questions I asked today, it would appear that only IPLEX have produced the labels - and it was because they were approached to do so (not sure if from the regulator).  So it doesn't look like the other piping systems are geared up at all.  Knowledge on this is sparse, although it was in the Info Brief from the PGDB.  We have fitted a few - but I was choking at the cost of what is essentially a label.  I think we will produce our own going forward and use them as a marketing tool.    So I guess big ups to Mico for being on board early!
    Share Post |

mini g

#13
May 12, 2014, 06:49:09 PM
PW are selling Rifeng tags for $12. The four major brands, K1, Kembla, Rifeng and Valsir are all made to the same std,  so they are technically interchangeable as long as the correct crimper is used for the fitting. Pipe dimensions are identical.
    Share Post |

Jaxcat

#14
May 12, 2014, 08:14:27 PM
I don't agree mini g - I think the manufacturer of the pipe has to state that it is interchangeable with another pipe system - see below from the Info brief
Quote from: Jaxcat on May 02, 2014, 01:48:08 PM
To summarise (direct from the Info Brief):

Proprietary pipe systems are one are that have significant changes with the installation of a pipe system.  Key points to note:
The requirement to follow manufacturer's instructions
The requirement to provide a label at the point of supply and
the provision for a reversion fitting or a transition connection

Manufacturers carry out tests to ensure products meet the stands to be used in NZ.  Each manufacturer can have different installation requirements - UV protection is a good example.  Here, instructions must be followed as the manufacturer states.  (NB - following manufacturer's instructions does not relieve the obligation to meet the requirements of Section 2 of the Standard).

As some proprietary pipe systems look alike, it is difficult to tell the difference between systems - particularly after the installation has been there for some time. Unless state otherwise, no other systems fittings or tooling can be used on their system.  Identifying the system is a key inclusion in the standard.

    Share Post |
Print
Go Up Pages1 2

* Share Topic

Share via digg Share via facebook Share via linkedin Share via twitter
User actions

Share this topic...

In a forum
(BBCode)
In a site/blog
(HTML)

Similar topics (5)